, Florida

Supporting the Most Exciting and Meaningful Missions in the World

QA Representative - Airframes

Quality Assurance Representative (Airframes)

BASIC FUNCTION SUMMARY
  • The Quality Assurance Representative (QAR) evaluates the quality of maintenance accomplished in the maintenance organization and performs necessary functions including; In-process inspections required during the performance of maintenance requirements and actions where satisfactory task performance cannot be determined after the task has been completed. These inspections include but are not limited to, witnessing application of torque, functional testing, adjusting, assembly, servicing, and installation. In-process tasks will be built by QARs/CDIs into WOs for NTCSS Optimized OMA NALCOMIS upon receipt of a maintenance task that requires an in-process inspection. Final inspections for specific QA functions performed following the completion of a task or series of tasks. The QAR must oversee and manage aviation programs and processes related to airframes field and perform quality assurance of troubleshooting, repair, replacement, rigging, and testing of aircraft systems and components.

ESSENTIAL DUTIES AND ACCOUNTABILITIES
  • Must meet qualifications, be recommended by management and pass designated examinations to become a QAR.
  • Conduct in-process and final inspections of all aircraft, engine, aircrew, ordnance or other related systems maintenance tasks which require a QA Representative sign-off per customer/company directives/publications. The Site Manager will determine any additional maintenance tasks requiring QAR level in-process and final inspections.
  • Review and investigate hazard reports, as defined in OPNAVINST 3750.6, received from other activities which may apply to the unit.
  • Assist in the preparation of NAMDRP reports.
  • Review all report entries for adequacy and correctness prior to distribution.
  • Provide technical assistance to CDIs and production personnel.
  • Monitor Programs IAW the NAMP and CSEC using an approved QA database.
  • Implement and administer the Special Emphasis Programs and other programs IAW the NAMP.
  • Coordinate with the analyst to develop discrepancy trends and applicable charts and graphs necessary to depict quality performance.
  • Comply with the applicable T/M/S conditional MRCs if flight control malfunctions occur.
  • Direct liaison between QA and production divisions is a necessity and must be energetically exercised.
  • Monitor the PAE Performance Management Approach and participate in the improvement processes.
  • Provide technical assistance to CDIs and production personnel who are required to make QA decisions. Accompany CDIs on inspections as directed to evaluate their performance.
  • Ensure contractor and field maintenance teams are briefed about FOD Prevention Program requirements and report discrepancies to the FOD Prevention Program Manager.
  • Ensure all work guides, checkoff lists, check sheets and MRCs used to define and control maintenance are complete and current prior to issuing to crews or individuals.
  • Verify MRCs are entered into the NALCOMIS OOMA or SESS data base as changes occur to the MRC decks.
  • Review all EI requests, BTRs PQDRs, TPDRs, ADRs, HMRs, EMRs, and CODRs to ensure they are accurate, clear, and concise, prior to submission via the JDRS web site.
  • Provide a continuous training program in techniques and procedures pertaining to the conduct of inspections.
  • Monitor information from MDRs, including NALCOMIS/OOMA reports/inquiries in developing discrepancy trends, to identify failure areas or other maintenance problems.
  • Ensure check pilots and aircrew are briefed before post maintenance FCFs so the purpose and objectives of the flight are clearly understood. After completion of the FCF, debrief the check pilots, aircrew, maintenance control representative, and applicable work center representatives to determine compliance with objectives outlined on the FCF checklist and clarify discrepancies noted.
  • Review all incoming technical publications and directives to determine their application to the Maintenance Department.
  • Ensure compliance with NAMPSOPs.
  • Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance recovery team or detachment as required.
  • Will have experience writing with clarity and technical accuracy.
  • Performs aircraft inventory, acceptance and transfer inspections.
  • Be capable of becoming Plane Captain certified when directed my management.
  • Perform other tasks as directed by management.
  • Provides technical assistance, guidance and instruction as required.
  • Maintains and/or completes required records and applicable maintenance forms
  • Performs daily duties normally associated with this specialty.
  • Practice good housekeeping, tool control, FOD awareness/prevention and safety at all times.
  • Assists in aircraft/equipment movement and flight line foreign object prevention walks.
  • Comply with Hazardous Waste Program.
  • Operates SE, flight line vehicles and other support equipment as required.
  • Qualified to perform corrosion detection, treatment, prevention and documentation per customer/management instructions/directions on aircraft and associated equipment.
  • Annotates maintenance actions in aircraft forms and VIDS/MAF, Work Orders in NALCOMIS/OOMA.
  • Will have knowledge of and understand basic supply procedures. Assist with ordering parts, tools, materials and equipment as required.
  • Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract, facilities and job assignment.
  • Keeps shop area clean and participate in daily hanger cleanups

QUALIFICATION STANDARDS
  • The Quality Assurance Representative (QAR) (Airframes) shall have a minimum of five years of aircraft maintenance experience performing repair and modification of aircraft. The QAR shall have at least three years as a collateral duty inspector or equivalent in accordance with the COMNAVAIRFORINST 4790.2D. The QAR shall have experience on applicable aircraft and possess fully developed skills related to the technical fields under their cognizance.
  • Must possess or be able to obtain a secret clearance.
  • Must be a US citizen and completed high school or equivalent.
  • Must read, write, speak, and understand English.

PHYSICAL DEMANDS AND ENVIRONMENTAL CONDITIONS

Physical Demands:

This classification's activities range from, an office-like environment with extensive sitting demands to a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching, and walking demands. May occasionally be required to lift objects whose weight exceeds 30 pounds. Special vision abilities to perform this job are close vision, depth perception, and the ability to adjust and focus.

Work Environment:

The diversity of work conditions may range from an office environment where there is little or no physical discomfort to a flight line environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes, airborne particles, and electrical shock hazards.

LICENSING, CERTIFICATION REQUIREMENTS As May be Required for Job Specialty or as Directed by Management
  • Driver's License
  • Egress/Explosive System Checkout
  • Emergency Reclamation*
  • Corrosion Control
  • Turn Up Certification*
  • Plane Captain Certification/Final Checker*
  • ABO*
  • Tow Supervisor/Tow Brake Operations
  • Aircraft Battery*
  • Tire and Wheel Certification*
  • CPR Certification*
  • Hydraulic Contamination Certification*
  • ESD/Electro Magnetic interference
  • Ordnance Certified*
  • Confined Space Entry*
  • Controlled Release*
  • Fuel Surveillance

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

EEO is the Law Poster

EEO is the Law Poster Supplement

, Florida

Amentum brings industry-best expertise, processes, and technology to ensure the availability and reliability of our Government and commercial clients’ vital facilities and equipment. We apply our culture of excellence to operate, maintain, and manage your global assets and complex supply chains to meet modern challenges at home and abroad. You get the confidence that comes from a partner with on a century-long heritage of unrelenting dedication to our clients’ missions across the DoD, civilian agencies, and the IC.

We are looking for skilled Veterans interested in continuing your career in aviation, global logistics, IT and Network support, and also unmanned systems. 

We currently have positions open nationwide and globally to include: Kuwait, Iraq, and other overseas locations!

Amentum’s skilled workforce lives with outcomes rather than just works on them. Our employees hold the most sought-after certifications in the industry, including Program Management Professional (PMP), IT/Cyber, ITIL, and Professional Scrum Master (PSM). Our teams who maintain and modify vehicles, aircraft, and weapons systems work within disciplined environments certified to AS9001D, ISO 9001:2015, AS9110B, and AS9100C standards.

Whether it’s managing facilities supporting the IC’s classified missions, operating UAVs that protect our soldiers, or maintaining military equipment at remote bases abroad, Amentum has the experience, passion, and commitment to meet your critical needs.

What happens after I apply? 

First, you will want to ensure your RecruitMilitary profile is up to date, and you also have the most up to date resume to provide. Once you apply for the role you will be re-directed to complete your employment application on Amentum's career site. Once you complete that application a recruiter will review your skills and qualifications and reach out to you about the role as appropriate.