Wright Patterson Air Force Base, Ohio

Overview

 

Oasis Systems has an exciting opportunity for a Avionics Integration Engineer, Senior located at Wright Patterson Air Force Base.  The Sr. Avionics Integration Engineer, will provide integration support to the F-15 Division.  The F-15 Division is responsible for management and professional services, engineering and technical services, and studies, analyses and evaluations to accomplish the unit’s mission to design, develop, integrate, test, produce, deploy, modernize, sustain and support U.S. and FMS F-15 fighter aircraft weapon systems and subsystems.

 

LOCATION:  Wright Patterson Air Force Base, Dayton, OH

JOB STATUS:  Full-Time

TRAVEL:  Occasional CONUS travel may be required

REQUIRED QUALIFICATIONS (Education, Certifications, Experience, Skills)

SECURITY CLEARANCE: DoD Secret Clearance Required

EDUCATION:

Minimum of ten (10) years of experience and a MS in engineering or a minimum of twenty (20) years of experience and an ABET-accredited bachelor’s degree in engineering. Works high-visibility or mission critical aspects of a given program and performs all functional duties independently. Oversees the efforts of less senior staff and/or is responsible for the efforts of all staff assigned to a specific job.

CERTIFICATIONS: No additional certifications required

 

EXPERIENCE LEVEL: Senior

Support application of knowledge and experience in engineering principles, criteria, and procedures to USAF systems, subsystems, and equipment procurement activities, post-award project/program management tasks, and acquisition programs throughout their life cycles.

 

Will have knowledge of avionics engineering in support of avionics subsystem definition, development, integration, all verification methods to include review of ICD, sustainment, Modeling, Simulation and Analysis (MS&A), T&E, and airworthiness certification across a wide range of hardware and software systems. The Contractor shall have knowledge of radar theory and principles, and an understanding of the radar design, development, and implementation process is required. Expected activities include providing technical advice and serving as the technical interface between the Government customers and the radar manufacturers, interacting with customers, participating in meetings, and producing technical detailed products.

 

RESPONSIBILITIES:

 

General Engineering – USAF

 

  • The Contractor shall support application of knowledge and experience in engineering principles, criteria, and procedures to USAF systems, subsystems, and equipment procurement activities, post-award project/program management tasks, and acquisition programs throughout their life cycles.
  • The Contractor shall apply an understanding of DoD, USAF and common engineering/scientific principles, processes and procedures to improve performance and sustainability of existing and future USAF and joint service weapon systems.
  • The Contractor shall have an understanding of applying MIL-HDBK-516B, Airworthiness Certification Criteria, to aircraft systems and subsystems.
  • The Contractor shall assist in translating user requirements into weapon system requirements, which will be used to design, develop, fabricate, test and evaluate weapon systems, subsystem and equipment for eventual fielding and deployment.
  • The Contractor shall assist with the development of requirements and technology needs into action plans and policies necessary to improve and retain world class manufacturing, operations, re-manufacturing and de-militarization/disposal of weapon system capabilities within USAF.
  •  The Contractor shall perform technical/mission analyses of existing and future operational requirements, assist in developing system concepts and perform technological/trade-off assessments of proposed designs/modifications.
  • The Contractor shall provide rapid response engineering service and support as augmentation to organic resources through in-depth problem identification, impact assessment and development of corrective actions for critical supportability problems.
  • The Contractor shall support and conduct the system safety engineering program, including mishap risk assessments, evaluate contractor safety proposals and safety analyses, evaluate safety concerns of F-15 using and support commands and assist with resolution of high priority safety issues.
  • The Contractor shall assist in translating Headquarters Air Combat Command (HQ ACC) and other user requirements into system requirements, which will be used to design, develop, fabricate, test and evaluate systems, subsystems, and equipment for deployment.
  • The Contractor shall provide support to produce or review products that include the following: technical evaluations/plans; engineering studies, reports and analyses; and acquisition strategies/plans such as: ICD; ORD/CDD; CONOPS; CPD; System Requirements Document (SRD); System Specification; RFPs; System Engineering Plan (SEP); Test and Evaluation Master Plan (TEMP); program environment, safety, and occupational health evaluation; information support plan; Program Protection Plan (PPP); Technology Assessment/Control Plan (TA/CP); cybersecurity strategy (formally information assurance strategy); Security Classification Guide (SCG); Alternative Live Fire T&E Plan; Clinger-Cohen Act compliance; consideration of technology issues; DM strategy; chemical, biological, radiological, and nuclear survivability assessments; net-centric data strategy; spectrum supportability determination; technical data rights strategy; technology readiness assessment; manufacturing readiness assessment, and; other program/technical documents as required.
  • The Contractor shall develop and collect technical data and inputs for staff summary packages and executive briefings to support coordination and signature of all associated documents for milestone approvals.
  • The Contractor shall support project team meetings, working groups, and all technical reviews, upon request, including but not limited to: SRR, PDR, CDR, TRR, TCM, TIMs, FCA, PCA, PRR, PMR, and other meetings/working groups/reviews as applicable.
  • The Contractor shall analyze equipment and software deficiencies, make recommendations for equipment and software deficiency corrections, and develop, integrate, and test equipment and software deficiency solutions.
  • The Contractor shall assist the Government in the engineering evaluation of prime weapon system/subcontractor recommendations for operational and support issues such as: evaluations of ACSNs, ECPs, CCPs, Federal Aviation Administration bulletins, modification proposals, DMS, program risk, and related documents.
  • The Contractor shall support the development and evaluation of IMP/IMS and systems engineering detail schedule engineering cost estimates.
  • The Contractor shall perform, as required, an advisory role for program source selections on all engineering-related requirements.
  • The Contractor shall support the F-15 Division in the performance of disciplined engineering activities to assure Operational Safety, Suitability, and Effectiveness (OSS&E) for all products. The Contractor shall follow the Life Cycle Systems Engineering (LCSE) and OSS&E related AFIs and all lower level supplements and related documents including applicable Operating Instructions (OI).
  • The Contractor shall assist with establishing, implementing and adhering to LCSE processes to ensure OSS&E compliance is achieved and maintained.
  •  The Contractor shall aid the USAF in reviewing and updating the OSS&E Baseline Document and shall support the USAF in the identification of OSS&E elements, progress reporting of OSS&E metrics, and interaction with other organizations to ensure continued OSS&E compliance.
  • The Contractor shall ascertain the implementation status of the SEP throughout program operations and notify the USAF of pertinent shortfalls or gaps for which corrective action may be needed.
  • The Contractor shall help support the Mechanical System Integrity (SI) Program, maintain and update the Critical Safety Item list, and monitor airworthiness certification for F-15 Division aircraft.
  • The Contractor shall participate in value stream mapping activities and Air Force Smart Operations for the 21st Century (AFSO21) Program Facilitation. The Contractor shall understand the AFSO21 initiative and shall be able to apply and facilitate performance improvement events and actions to ensure the use of best engineering practices.
  • The Contractor shall advise the F-15 Division on engineering determinations of acceptable substitutes when parts obsolescence occurs.
  • The Contractor shall apply an understanding of systems acquisition, system and sub-system level hardware and software integration, systems requirements analysis and allocation, computer systems architecture, and systems and subsystems T&E.

General Engineering – FMS

  • The Contractor shall have working knowledge of the ITAR and foreign disclosure processes. The Contractor shall have an understanding of the Congressional notification and RIP/RIS approval process and support the Government in working through these processes.
  • The Contractor shall understand and provide advice on USG policy and technical requirements for individual countries as it relates to the acquisition programs.
  • The Contractor shall provide FMS expertise for various FMS programs within the F-15 Division that are in varied DoD acquisition stages to include planning, execution, delivery, sustainment and program closure IAW DoD policies and guidelines.
  • The Contractor shall assist with the monitoring, reviewing, analyzing and coordinating security assistance issues concerning DoD and non-DoD agencies to ensure compliance with established
  • The Contractor shall assist with Pre-LOA (P&A) and LOA, SOO/SOW development/editing, and reviewing of proposals as assigned by the Government.
  • The Contractor shall assist with reviews of various acquisition documents, export licenses, or other documentation submitted by the prime weapon system or original equipment manufacturers for Government review; and assist with release and coordination of Government responses.
  • The Contractor shall assist with the implementation and execution of assigned LOAs IAW the AECA, Security Assistance Management Manual, DSCA Manual 5105.38-M and complete assigned projects with no or minimal assistance.
  • The Contractor shall provide technical expertise and advice to SAPMs, line managers, and functional team members across all phases of the acquisition process and insight into areas relating to technical policy and lessons learned.
  • The Contractor shall ensure requirements are identified to provide initial support for new acquisitions or modifications of weapon systems through sustainment and disposal.
  • The Contractor shall work with Government personnel, outside agencies, Contractor personnel, and others to support the program. Contractor personnel assist in preparation of technical material for internal and external briefings, presentations, documents and reports

Avionics Integration Engineering – USAF or FMS

  • Shall serve as an avionics engineer with particular emphasis in integration of radar and EW sensors.
  • Develop/review/update applicable program documentation for avionics engineering relevant requirements.
  • The Contractor shall assist the Government in drafting and developing systems/subsystem specifications and various engineering documents in support of milestone reviews and events.
  • Be responsible for development and test of the program system hardware and software and its integration into the program system architecture. Attend all technical reviews and provide technical advice on the path forward to installation of the new hardware and software into the system. Review system specific test plans and participate in the conduct of system, subsystem, and component testing.
  • Support and conduct performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies.
  • Support hardware/software development and related system ground and flight test activities including, but not limited to, hardware-in-the-loop, subsystem integration labs, developmental T&E, and initial operational T&E related activities.
  • Support and conduct systems analyses to include, but not limited to, avionics system design/design feasibility and state-of-the-art assessment requirements, system capacity analysis, investigate alternative solutions and architecture trade-offs, support operations concept development and document results.
  • Perform analyses of avionics and subsystems including, but not limited to, system threat analysis, laser systems, computer systems, avionics interfaces, and multiplex data bus communications. Identify potential issues and/or areas of improvement for Government consideration.
  • Shall accomplish data processing including centroiding, tracker, timing issues, data loading issues, software; interfaces to combat system and/or automation systems including required data, quantity of data, data merging and integration.
  • Shall accomplish MS&A of radar, targets, and clutter/weather; testing and evaluation of radar system performance including developing test plans and procedures, witnessing tests, and writing test reports for qualification testing, operational field testing, and factory system-level testing.
  • Support Aircraft Information Management Systems (AIMS) requirements/testing/certification and spectrum management requirements/testing/certification.
  • Use knowledge of Communication Navigation Surveillance/ Air Traffic Management (CNS/ATM) requirements, policies, and regulations to define requirements, complete CNS/ATM compliance matrices, and support testing and certification of aircraft and supporting systems.
  • Perform technical activities associated with radar waveforms and signal and data processing techniques that provide robust performance in Electro-Magnetic Interference (EMI), Electronic Counter-Measure (ECM), multipath, ducting, and clutter environments. These activities may include, but not limited to, phased array and active aperture antennas, adaptive array processing, digital beam forming, klystron and solid state transmitter technologies, receiver and transmitters stability issues, advanced Analog-to-Digital (A/D) technology, EMI, ECM, and EW. Digital signal processing including Moving Target Indication (MTI), pulse Doppler, monopulse, imaging, and adaptive techniques, Constant False Alarm Rates (CFARs), clutter maps, and timing issues.
  • Apply an understanding of aeronautical vehicle systems, software, and/or airborne or related ground systems avionics capabilities to support the core engineering tasks as they relate to EW engineering.

 

Who We Are
Oasis Systems is a premier provider of customer-driven, cost-effective and quality Engineering Services; Enterprise Systems and Applications; Human Factors Engineering; Information Technology and Cyber Security; Professional Services; and Specialized Engineering Solutions to the Department of Defense, FAA, NRC and other federal agencies.

We strive to be an exciting and welcoming company that attracts, develops, motivates and retains the most talented, skilled and dedicated people in the industry; where they are encouraged to achieve personal excellence, purpose, and their full potential and career aspirations; while supporting mission-critical national security technologies and programs.

Oasis Systems is an equal opportunity employer and does not discriminate in hiring or employment on the basis of any legally protected characteristic including, but not limited to, race, color, religion, national origin, marital status, gender, sexual orientation, ancestry, age, medical condition, military veteran status or on the basis of physical handicap which, with reasonable accommodation, render the application to satisfactorily perform the job available.

 

 

Wright Patterson Air Force Base, Ohio

Oasis is a fast growing provider of Advisory and Assistance Services (A&AS). We are strategically positioned to support Federal Government Agencies across the USA. Oasis provides a wide array of capabilities to our customers, including but not limited to: Acquisition Program Management Systems Engineering Information Assurance / Cyber Security Network Operations and Systems Management Software Development and Management Test and Evaluation Software Engineering Logistics Our growth is a result of competing, winning and executing programs as a prime contractor with a passionate commitment to customer success. We perform over 90% of our business as a Prime Contractor with an experienced management team, DCAA approved financial systems, and the highest possible ratings from Dun & Bradstreet. Oasis has a proven unparalleled track record of transition, management and performance capabilities.

Similar jobs